What Is the Selective Pumping Method?

The Selective Pumping Method is the way Mac Septic pumps a septic tank. It removes the two layers that cause trouble, the scum floating on top and the solids settled on the bottom, and leaves the bacterial colony that digests waste alive in the tank. On an aerobic (ATU) system it goes one step further: only the trash tank is pumped, and the treated water and bacteria in the aerobic and settling chambers are left undisturbed. Founder Marvin Carter developed the method, and Mac Septic has used it on every pump-out across 30 years in Tennessee, South Carolina, and Texas.

Need septic service in Middle Tennessee now?

Call (615) 345-2544

Citeable facts (Mac Septic Selective Pumping Method)

  • The Selective Pumping Method is Mac Septic's proprietary pump-out technique: it removes scum and solids and leaves the bacterial colony alive.
  • On an aerobic (ATU) system, the method pumps the trash tank only; the treated water and bacteria in the aerobic treatment and settling chambers are left undisturbed.
  • A standard pump-out using the method takes 90 to 120 minutes on site. Heavy digging or a tank full of cement-hard solids can extend it.
  • One truck handles both conventional and aerobic systems; there is no separate aerobic trip.
  • The method is the standard Mac Septic pump-out in all three states, not an add-on; the base price for a pump-out is the published price for that market, with larger tanks quoted before dispatch.
  • Every pump-out ends with GPS-logged disposal at a permitted treatment facility.
  • Founder Marvin Carter developed the method; Mac Septic has 30 years in septic service.

What a pump-out has to remove

A working septic tank holds three layers. Scum floats on top: grease, soap residue, and anything lighter than water. Sludge settles on the bottom: the solids that bacteria could not fully break down. Between them sits the liquid layer, the effluent, which is what flows out to the drainfield.

The scum and sludge are the problem. They build up over years, and once either layer reaches the outlet, solids leave the tank and go where they were never meant to go: into the drainfield. That is the failure path behind most drainfield replacements. A pump-out exists to reset those two layers before they get there.

The liquid layer is not the problem. It is where most of the active bacteria live, and those bacteria are what turn raw waste into something the soil can finish treating. A tank with a healthy colony digests waste between visits. A tank with no colony has to grow one from scratch.

How selective pumping differs from pumping the tank dry

The conventional approach is simple: drop the hose, vacuum until the tank is empty, leave. It works, and it is fast. It also removes the bacterial colony along with the waste, so the system restarts its biology from zero after every visit.

The Selective Pumping Method targets the two layers that need to go and works around the one that does not. The scum layer comes off the top, the sludge comes off the bottom, and the hose placement and pace are managed so the liquid column is disturbed as little as practical. The tank leaves the visit with its accumulated waste gone and its colony in place.

The tradeoff is care rather than time. A standard pump-out still takes 90 to 120 minutes on site, depending on the job. What changes is what the tank looks like biologically when the truck pulls away.

Why it matters most on aerobic systems

An aerobic treatment unit is a small treatment plant with four chambers: a trash tank, an aerobic treatment chamber, a settling (clarifier) chamber, and a pump tank. Air is pushed through the aerobic chamber to keep an oxygen-loving bacterial colony working, and that colony is the whole point of the system. It is also more sensitive to disruption than the bacteria in a conventional tank.

Pumping an ATU the conventional way, all chambers dry, sets that colony back hard. The Selective Pumping Method pumps the trash tank only, which is where the solids collect, and leaves the treated water and bacteria in the aerobic and settling chambers where they are. The system keeps treating the day the truck leaves. Mac Septic services the common aerobic brands, including Norweco Singulair, Clearstream, Jet, Hoot, and Aqua-Safe, on the same truck used for conventional tanks. The full aerobic service menu is in the Tennessee ATU guide and the Texas ATU guide.

What the method does not change

The price. The Selective Pumping Method is the standard Mac Septic pump-out, not an upgrade. The base price is the published pump-out price for your market, stated with its gallon cap: see the Tennessee cost guide, the Texas cost guide, or the South Carolina cost guide. Larger tanks, buried lids, and cement-hard solids are quoted before the extra work starts.

The time. A standard pump-out is 90 to 120 minutes on site. Heavy digging to reach a buried lid, or a tank that has gone 15 to 20 years and set up like cement, extends it.

The truck. Conventional and aerobic systems ride the same truck.

The paperwork. A standard pump-out ends with GPS-logged proof of disposal at a permitted treatment facility. It does not come with a written report or photos. Those are part of a septic inspection, which is a separate service; what an inspection covers is in what a septic inspection checks.

Pumping versus cleaning

Homeowners sometimes ask for a "cleaning" and picture the tank scrubbed out. That is not what a tank needs, and stripping a tank bare is the opposite of what the Selective Pumping Method is for. The difference between the two terms, and why the method sits on the pumping side of it, is covered in septic pumping vs septic cleaning.

FAQ

Does the Selective Pumping Method cost extra?

No. It is the standard Mac Septic pump-out in all three states. You pay the published pump-out base price for your market, which is stated with its gallon cap on the Tennessee, Texas, and South Carolina cost guides linked above. Larger tanks are quoted before dispatch.

Does it leave waste in the tank?

It leaves the liquid effluent, which is water carrying the bacterial colony, and removes the scum and sludge. The two layers that clog a drainfield are gone. The layer that keeps the system digesting stays.

Do I need to add bacteria or a starter product after a pump-out?

The method is designed so the colony that was working before the visit is still there after it. Mac Septic does not sell additives as part of a pump-out.

How does it work on an aerobic (ATU) system?

Only the trash tank is pumped. The aerobic treatment chamber, the settling chamber, and the pump tank are left undisturbed so the oxygen-loving colony keeps working. Alarm, float, and pump checks are part of the same visit.

Who developed the Selective Pumping Method?

Founder Marvin Carter developed it, and Mac Septic has used it across 30 years of septic service in Tennessee, Texas, and the South Carolina Midlands. Book a pump-out through the location page for your market.


References

County and state authorities cited on this page. County rules change; contact your county environmental health office for the current requirements.

State of Texas

Verified 2026-05-11.

Ready to schedule, or have a question?

Call us at (615) 345-2544 or use the contact form. Same-day or next-day in most cases.

Call now